Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Oiling shinai

  1. #1
    Broken Kenshi nodachi's Avatar
    Join Date
    Oct 2002
    Location
    MA
    Posts
    2,177
    Country: United States

    Oiling shinai

    So, I just bought a shinai today. My last one broke at practice this last sunday. Sniff sniff, but it was past it's time...

    Anyway...

    I tried to sort through when I needed to oil it or not with the store person, but my japanese is not so strong. It sounded like she was saying that it was ready to go for practice. She even put the sakigawa and tsukagawa and all the parts and pieces and stuff on. Should I take that as an okay that it is ready to go? I thought that most shinai had to be oiled before their first use?

    All suggestions are appreciated. I am hoping not to goof up and have this one break too soon. I accept that it will break, but I would like to get some mileage out of it and am afraid that not oiling in the beginning will drastically shorten its lifespan.

    Help the ignorant, thank you

  2. #2
    Yudansha aru-ma's Avatar
    Join Date
    Jan 2003
    Location
    Melbourne
    Posts
    348
    Country: Indonesia
    take the shina home take the leather bits of and soak the shinai with oil, your shinai may have already been oil but just as a precation. if it was me I'll soak it regardless I like my shinai shiny .
    actually what I do with my new shinais that I let it soak in hot/boiling water or a few minutes, let it dry, then soak it with oil, let it dry and coat it with oil again.
    Don't drop the ball!

  3. #3
    sakeholic & shiaiholic Paburo's Avatar
    Join Date
    Jan 2003
    Location
    Madrid
    Posts
    1,607
    Country: Spain
    they assembled your shinai at the moment of the sale?

    you should know if it's oiled or not by looking at it and touching it.

    you can always disassemble it and oil it again anyway. shinais don't die for excessive lubrication :D

    it might be a bit heavier at the end, but that's ok. you'll grow strong arms from suburi.

    jaa ne.
    Kenshi-Katagi [剣士気質]
    http://kenshi-katagi.blogspot.com/

  4. #4
    Broken Kenshi nodachi's Avatar
    Join Date
    Oct 2002
    Location
    MA
    Posts
    2,177
    Country: United States
    Pick out the bamboo size and balance you like, then they went right to it and put it all together, 3 minutes later, I had me a new shinai.

    They have quite a bit of practice, they were quick!

  5. #5
    Yudansha Steve's Avatar
    Join Date
    Aug 2002
    Location
    Kingston, Ontario
    Posts
    262
    Country: Canada
    oil-bathing is necessary depending on how your shinai was constructed. If the bamboo was dried in a kiln, then you MUST give it an oil bath. If it was dried naturally (ie air dry) then you don't. it won't hurt it if do it anyway though.

    Either way though, you still need to apply maintenance oil to your shinai regulary to keep it lubricated and to help protect the bamboo.
    --------------------------------------------
    Steve Quinlan
    Kingston Kendo Club
    http://www.kingstonkendo.org
    --------------------------------------------

  6. #6
    Vincit qui se vincit iwatekenshi's Avatar
    Join Date
    Mar 2002
    Location
    Iwate, Japan
    Posts
    201
    Country: Japan
    Don't worry you live in Japan where the humidity is high. It's not necessary to do all that. An occasional spray of shinai oil from the bogu shop will just do. What the best thing you can do is shave down the edges of the bamboo slats which will allow more flexible movement between them when striking. After shaving, apply oil and this should be enough to help the longevity of the shinai.
    J. Ogura 敵有我

  7. #7
    hmm.. how do you know if your shinai was air dried, or kiln dried??

  8. #8
    Yudansha Steve's Avatar
    Join Date
    Aug 2002
    Location
    Kingston, Ontario
    Posts
    262
    Country: Canada
    Not exactly sure, but i think the cost of the shinai would be a good assumption.

    REad the "construction of a shinai" and FAQ on the akatsuki website. Thats where i got that little jewel of info.
    --------------------------------------------
    Steve Quinlan
    Kingston Kendo Club
    http://www.kingstonkendo.org
    --------------------------------------------

  9. #9
    Yudansha mark's Avatar
    Join Date
    Nov 2002
    Location
    Montreal
    Posts
    1,297
    Country: Canada
    Why does Aru-ma soak his shinai's in hot water before putting it in oil?
    While we are on the topic ...
    In addition to oiling shinai's, in one of the threads someone mentioned that they coated their shinai with beeswax after oiling while someone else stated that all they did was burnish the edges. Does anyone know if this works, and if so how it is done?
    Mark~Gingras

  10. #10
    Taicho! ^_~ Phorest's Avatar
    Join Date
    Dec 2002
    Location
    Morgantown, WV
    Posts
    212
    Country: United_States
    What a coincidence...I'm going to oil my Shinai today! I sanded down the endges last night, and the oil happens today.

    Heres my question: should I soak the staves completely in oil ir just wipe them down with oil?

  11. #11
    Gorget-the-Frog
    Guest
    should I soak the staves completely in oil ir just wipe them down with oil?
    I usually lay the staves on a table or somesuch, with newspaper under, and fill the grooves with oil. Then just leave them for a few days, adding oil as nessisary. The day before I reassemble I wipe off the excess oil and leave them overnight to dry.

  12. #12
    Karaken
    Join Date
    Dec 2002
    Location
    NY - USA
    Posts
    68
    should I soak the staves completely in oil ir just wipe them down with oil?

    I used to dip them in three inch drain pipe filled with oil for a month. Then I bought a Carbon Shinai..

    SC

  13. #13
    Taicho! ^_~ Phorest's Avatar
    Join Date
    Dec 2002
    Location
    Morgantown, WV
    Posts
    212
    Country: United_States
    I'm bitter with jealousy. I can see now why having a carbon shinai would be a huge advantage.

  14. #14
    VooDoo Hentai KhawMengLee's Avatar
    Join Date
    Jun 2002
    Location
    Koala Loompour
    Posts
    3,067
    Country: Malaysia
    get a carbon shinai later. Maintainance of your bamboo shinai builds character. Its also part of the learning process in Kendo.

    After a few goes you will be fine...like those armyheads who can disassemble and reassemble their rifle in 30seconds.
    SHUGYOSHA

    My name is Pullo...Titus Pullo.


    ALL YOUR IPPON ARE BELONG TO US!!!


    Proud "extra hentai" member of the Seven Smutty Samurai.

    "See my kote! See my kote! (kicks opponent in the crotch) Well ya should have been watching my foot!"
    Meng just before being given hansoku.

    http://mengkhaw.blogs.friendster.com/angry_dawg/

  15. #15
    Dwayne P.
    Guest
    Nodachi, I would consider doing maintenance on your shinai if it is question. Like KhawMengLee says it builds character.

    Here in Florida the humidity is off the charts, usually a good sanding + wipe down with some lind seed oil usually does the trick. Every now and then I’ll lightly coat the bottom stave with some wax. Just from the tip to the nakayuki to give a bit of added protection.

    Dwayne

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •